It's Moved!

 My awesome neighbor helped me move my machine, and it went smoother than I thought it might. More pictures to come soon on the state of the things, but I'm so happy I finally got it out of the car and into the basement.

Stay tuned!

Comments

Post a Comment

Popular posts from this blog

550-5038-01 (part 1)

Image
 Well, I've started taking apart the playfield, and in the process, dealing with that broken part . Here, I'm going to detail what I've gotten up to trying to fix it. Accurately Modeling The Part In my pinball machine, there are two flippers at the bottom. Both of them have unique guides with unique part numbers: It seems like the left and right side are mirrored images of each other. So, I took the mostly complete right side guide, and scanned it on my neighbor's scanner: From here, I used the ruler scale the image in Fusion360 (cad software), and traced the outline of the part: I was able to recreate a bunch of the dimensions in inches, and they are generally sensible numbers, like 1 1/12 inches, 1/4 inch, etc: From here, I was able to extrude this object into a 3D shape, and get it ready for printing: And I printed the part to test that it would work: Everything lined up perfectly, and the part looks great! Stay tuned for part 2 of this, when I try printing in clear
Read more

Twinkle Twinkle Little Star

Image
 The screen my machine came with was busted, and the replacement was the wrong part. I wasn't smart enough to see that when I purchased the machine (but I am now). In any case, I've spent about a month of time (waiting on parts and other things) trying to get my screen working reliably, and with much support from the folks over at ColorDMD , I've finally been able to get it working: The main problem was my ROMs. Maverick has 5 ROMs in it, 1 for the CPU, 2 for the display, and 2 more for the sound. In my case, my CPU and display ROMs were an older version, and the new color display wasn't programmed to support the older pinball software. After much back and forth with the folks at ColorDMD, we decided it was likely that upgrading the ROMs would fix the problem. 27C256 At the junction when you decide you need to upgrade your ROMs, you have 2 choices. You can either order some, or (if you're a nerd like me), you can burn the new code into the old ROMs after erasing the
Read more

Chips and Boards (mostly OK!)

Image
 I have been debugging lots of problems in the machine. First, some good news, I've gotten the screen working. I've replaced it with a completely new one: I have a few problems with it, but that'll be for another post. Tonight's post is about CPUS. Have Iron, Will Travel Part of debugging the screen has me questioning that the CPU board is in good shape. I'm pretty sure the power supply isn't helping (again, more later), but I decided to take the CPU board out, and see if I could see anything obviously wrong with it. The CPU board was largely in good shape. You will note, there's a battery pack on it. This needs to be removed because, over time, the batteries leak, and put an alkaline all over the board. While this doesn't immediately ruin a board, over time it well. So, that's coming off: Otherwise, as I inspected the board, I didn't see any obvious problems. The capacitors all looked good, the chips all looked good, the transistors all tested w
Read more